Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Grips
$8.49
Gel rubber construction for the optimum balance of comfort and durability.
- Diamond pattern provides excellent grip
- 90mm length
$11.49
Gel rubber construction for the optimum balance of comfort and durability.
- Diamond pattern provides excellent grip
$11.99
Ergonomic shape relieves nerve pressure to alleviate numbness.
- Dual density construction offers exceptional comfort
- Gel rubber construction for excellent durability
$24.99
Gel rubber construction for the optimum balance of comfort and durability.
- Medium-profile diamond pattern provides excellent grip
- Dual lock-on clamps for maximum security
- OD: 31mm
- Length: 130mm
$24.99
Gel rubber construction for the optimum balance of comfort and durability.
- Waffle grip pattern provides excellent grip and vibration dampening
- Flange provides added contact enhancing control
- Flange cut-away provides shifter and thumb clearance
- OD: 30mm
- Length: 135mm
$24.99
Luxurious EVA foam.
- Excellent OEM replacement
- With adhesive backing
- 210 x 3cm
- Black screw-in end plugs included
- A whole spectrum of color options
$34.99
Plush, high grip, perforated polymer tape
- 210 x 3cm
- Waffle texture with super gel
- Adhesive backed
- Black screw-in end plugs included
$21.99
The Denim Cox signature Grime Grip features a traditional mushroom pattern in the super soft sticky Krayton rubber that you've come to expect from BSD. The design has reinforced slime at the ends for extra durability and a debossed Grime skull with missing teeth, just like Denim...
- Flangeless mushroom design made from soft Krayton rubber
- Forever bar ends with washers
$21.99
Leezy was cutting the inner flange off his Paley Slims so that the mushroom part of the grip went right to the end. His reason being that that it was comfier to catch barspins on. BSD designed the new Leezus Handles around that idea, coupled with their new softer stickier compound these slim grips feel as good as they look.
$21.99
Simple mushroom style design made of Krayton rubber.
- Flangeless slim mushroom design
- Bar ends included
$21.99
Dan Paley signature grips: Dan Paley is really fussy when it comes to grips, not too fat, not too thin, not too squishy, the list goes on. The Dan Paley Slims however are just right.
- Flangeless Dan Paley zigzag design
- Krayton rubber
- Bar ends included
$38.00
Single aluminium clamp design with covered/hidden bolt
- Dual-compound with soft grip area and harder endcaps for impact and scratch protection
- Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side
- Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping
- Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip
- Weight: 113g /pr
- Length: 140mm
- Diameter (rubber part): 31mm
- For handlebar diameter: 22.2mm
$14.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
$32.29 - $37.99
$37.99
Up to 15% Off
Lock on to the trail
Confidently handle any trail with the XR Elite mountain bike grip. This 30mm single lock-on grip features core lock clamps to hold tight on any terrain, and the perfect combination of rubber compound and tread design adds comfort and confidence on any trail.
Key features
- Tread and rubber compound provide secure grip, control, and comfort
- Tread features continuous channels to funnel sweat for effective moisture management
- Single-clamp design maximizes grip surface for secure, predictable performance
- Core-lock clamp eliminates slipping by securing grip core to bar
- 3mm M4 bolt increases hold and resists stripping
- 30mm diameter
$34.99
Made with recycled materials, this lock-on grip with a unique tread pattern and thick profile adds comfort and control on technical trails.
Lock on to the trail
Confidently handle any trail with the SE Elite Recycled Grip made with recycled plastics in the core. This lock-on grip uses clamps to secure the core for a tight hold in any terrain, while a unique opposing tread pattern provides the perfect amount of traction and padding for your palms.
Using recycled materials in this product helps provide second life to unwanted end of life plastics.
Product details
- Grip core is made from recycled plastic
- Opposing tread pattern absorbs shock in palms and increases grip at fingertips
- Rubber compound provides confident grip, control, and comfort
- Tread features continuous channels to funnel sweat for effective moisture management
- Single-clamp design maximizes grip surface for secure, predictable performance
- Core-lock clamp eliminates slipping by securing grip core to bar
- 3mm M4 bolt increases hold and resists stripping
- 32mm diameter
- Length: 130mm
- Weight: 115g
Features:
The net effect
Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution.
A global issue
Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world.
Better products for a better planet
We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.
$37.99
A durable lock-on grip with a unique finned texture for added comfort and control on the trail.
Get a grip on sustainability
The XR Trail Elite mountain bike grip has a finned texture that forms to your hand to keep you comfortable on all-day riding sessions. A higher density material surrounds the end of the grip for added durability and the lightweight CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics.
Product details
- Finned texture pattern conforms to your hand for supportive grip
- Rubber compound and tread design are optimized for control and comfort
- Grip core made with recycled ocean-bound plastic
- Single-clamp design maximizes grip surface for secure, predictable performance
- Alloy core-lock clamp eliminates slipping by securing grip core to bar
- Higher-density end cap resists scraping for added durability
- 3mm M4 bolt increases hold and resists stripping
- 31mm diameter
$42.49 - $49.99
$49.99
Up to 15% Off
A dual lock-on MTB grip with a unique finned texture that provides a secure, comfortable grip for your hands for added support and control.
Take command of your cockpit with a secure, confident grip that conforms to your hands for added comfort and control. The XR Trail Pro features a finned texture that provides a secure yet forgiving feel that oozes confidence and keeps you comfy on even the longest days on the bike. A dual Lock-on keeps things in place and the recycled materials that make up the grips' core breathe a second life into ocean-bound plastics.
Product details
- Finned texture pattern conforms to your hand for supportive grip
- Rubber compound and tread design are optimized for control and comfort
- Grip core made with recycled ocean-bound plastic
- Dual-clamp with alloy core-lock design offers secure positioning for solid, predictable performance
- Available in both standard 130/130 and 90/130 SRAM TwistLoc-compatible designs
- 3mm M4 bolt increases hold and resists stripping
- 32mm diameter
$49.99 - $54.99
Take care of your hands with an ergonomic, paddle-shape design that evenly distributes pressure across your hands and helps reduce hand fatigue. The Satellite Elite Grip features a dual-density compound that offers variable padding and unparalleled vibration absorption to ensure comfort on every ride.
Key features
- Dual-density compound design provides secure grip, control, and comfort
- Contoured design comfortably supports palm to decrease fatigue
- Lock-on clamp securely holds grip core to bar, eliminating slipping
$49.99
Made with recycled materials, this dual-density lock-on grip features an ergonomic shape for the ultimate in support and comfort.
Comfort at the palm of your hands
Go the distance with the XR Endurance Elite Recycled Grip, made using recycled plastics in the core. The contoured shape provides ultimate ergonomic support, while an opposing tread pattern ensures your palms are padded and your fingers are locked in, keeping you comfortable no matter how long you're out on the trails.
Using recycled materials in this product helps provide second life to unwanted end of life plastics.
Product details:
- Grip core is made from recycled plastic
- Contoured design comfortably supports palm to decrease fatigue
- Opposing tread pattern absorbs shock in palms and increases grip at fingertips
- Dual-density compound design provides secure grip, control, and comfort
- Tread features continuous channels to funnel sweat for effective moisture management
- Core-lock clamp eliminates slipping by securing grip core to bar
- 3mm M4 bolt increases hold and resists stripping
- inForm BioDynamic shape with narrow in-board diameter increases finger wrap
Features:
The net effect
Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution.
A global issue
Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world.
Better products for a better planet
We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.
$55.24
$64.99
15% Off
A dual-density lock-on grip with an ergonomic design and IsoZone vibration damping for all-purpose comfort.
- Integrated clear gel adds comfort and shock absorption
- Dual-density compound design provides secure grip, control, and comfort
- Contoured design comfortably supports palm to decrease fatigue
- Lock-on clamp securely holds grip core to bar, eliminating slipping
$65.00
Our best rubber grips for straight bars, thermoplastic rubber is fused with organic cotton for a natural look and feel. Suitable for city, MTB and touring use and adjustable for specific performance.
Our best rubber grips for straight bars, thermoplastic rubber is fused with nylon textile for a nice look and comfortable feel, substituting organic cotton in the natural colour version. With aluminium clamp and branded rubber end plug, and adjustable for specific performance, these grips are suitable for city, MTB, and touring use. The dual textures embossed into the rubber mean the rider can turn the grip and adjust it to their preferred option.
IDEAL FOR:
- Commuting in the city
- Travelling the globe
- Urban cycling
$77.50
Perfectly matching Brooks Cambium Saddles, Brooks Ergonomic Grips are durable and weatherproof rubber handlebar grips with a pleasant touch and feel, shaped for more comfort and variable hand positions.
Sporting details to perfectly match with our Cambium Saddles, Brooks Ergonomic Grips are durable and weatherproof rubber handlebar grips with a pleasant touch and feel. Nylon fabric and vertical grooves on the underside provide increased comfort and variable hand positions. The aluminium clamp allows the grip to be adjusted for a perfect fit, with the iconic Brooks rivet at the bar end added for an elegant finishing touch.
FEATURES:
- Ergonomic shape
- Varying sectional rubber density
- Hard-wearing materials and details
- Perfect match to the Cambium saddles
- Thermoplastic rubber vulcanised with UV + Abrasion-Resistant Waterproof Nylon on the top and ergonomic grooves on the underside
$28.00
The Bartender, the Jagermeister of grips.
No fuss rubber, lock on and rock out. The combination of a tacky rubber compound and the knurled pattern offers the bench mark in traction and durability.
- Weight 90g
- Single lock on
- Low profile design
- 30mm Diameter
$34.00
"Make a grip with the fussiest rider on the planet, you must be mad!!"
The Bartender Pro is the next level in grip design for Burgtec.
We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening.
- 31.5mm Diameter.
- 30A Rubber Compound
- Single Lock On
$37.00
The Goats Grip just went Super Soft.
Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez.
- Super Soft Compound
- 31.5mm Diameter
- Single Lock-on
- Tapered Core
$41.00
Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
$22.50
Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI's superior rubber material. The flangeless design features a generous 160mm (6.3") width and super comfortable 30.5mm (1.2") diameter. Thin, mushroom-style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug-style bar ends.
- Length: 160mm
- Diameter: 30.5mm
- Bar ends: Plug Style
- Weight: 3.3 oz
$32.99 - $39.99
Mountain Bike Handlebar Grips Flangeless
‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’
BRENDAN FAIRCLOUGH
$18.99
DEITY Grip Clamps offer a way to customize your bike to match your style.
$34.99
The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.
$34.99
Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit
$34.99
- 31mm grip with micro diamond pattern
- Kevlar infused TRC + rubber compound
$34.99
- The thinnest DEITY grip to date
- Featuring soft DEITY TRC+ rubber compound for durability and increased grip
- Tapered inner sleeve to ensure perfect contact with the handlebar
- Single clamp design with forward facing bolts that feature loc-tite
- Lasered black ano 6061 T6 aluminum clamps
- Seamless transition through the end of the grip for comfort and full range of control
- Diamond pattern wraps around the end of the grip
- 133.75mm length with a 30.5mm outer diameter
- Not compatible with bar ends or plugs
- Intended use: All MTN / Enduro / DJ / Slopestyle and DH
- 96 grams for the set
INSTALLATION TIP:
To fully and properly install your SLIMFIT grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging.
$34.99
We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability.
- 34mm outer diameter with plush cushioning throughout
- Deep-dish DEITY diamond pattern compresses for comfort but also provides traction
- Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip
- Tapered inner sleeve to insure perfect contact with the handlebar
- Single clamp design with forward-facing bolts that feature Loctite
- Lasered black ano 6061 T6 aluminum clamps
- Seamless transition through the end of the grip for comfort
- Capped end for safety and comfort
- 133mm length with 34mm outer diameter
- Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice
- 118 grams for the set
$25.25 - $29.99
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump
- UV resistant and non-porous, they will not fade or harden
- Non-slip grip compound that stays put even when wet
- Fit XC: 13
$39.99
Get a grip…or two!
Grips are a key point of contact between you and your bike.
- Electra lifestyle grips help to personalize your ride
- Durable Kraton lock-on grips featuring ergonomic shape for comfort and support
- Matching saddle available for some models
- Set of two grips
- Length: 130/130mm
- Diameter: 22.2mm
- Material: Kraton
- Weight: 172g
$49.99
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
$52.49
More support with more comfort
Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed!
What exactly are the benefits of the wings on the grips?
The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist.
What is the carpal tunnel?
The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness.
The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence.
As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes.
The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!
$52.49
More support with more comfort
Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed!
What exactly are the benefits of the wings on the grips?
The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist.
What is the carpal tunnel?
The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness.
The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence.
As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes.
The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!
$54.99 - $59.99
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
- Length: 135mm
- Lock On: Yes
- Weight: 105g
$54.99 - $69.99
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
$57.49 - $69.99
Ergon GD1 Evo slim grips.
- Shape: Round
- Length: 144mm
- Lock On: Yes
- Grip Shift Specific: No
- Weight: 120g
- Flange: No
$57.49 - $69.99
The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel.
- Shape: Round
- Lock On: Yes
- Grip Shift Specific: No
- Flange: No
$57.49
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
- Carbon bar compatible
- Uses: mountain biking, touring, commuting
- Clamp: 100% recyclable aluminum
$59.99
Ergon GD1 Evo slim factory grips.
- Shape: Round
- Length: 144mm
- Lock On: Yes
- Grip Shift Specific: No
- Weight: 120g
- Flange: No
$59.99
The GS1 Evo reimagines what ergonomic comfort can be for touring, trail and E-Bikes by minimizing aching hands and numb fingers. Ergon took the best-selling GP1 winged grip and evolved it with popular characteristics of the mountain specific GA3. The GS1 Evo features a larger supportive wing than the GA3 and a sleeker profile than the GP1, a specific textured grip zone for the thumb, fingers and palm and a softer overall touch. Always prioritizing materials, the GS1 Evo is composed a proprietary rubber compound Made in Germany. From quick jaunts across town to endurance events to journeys across continents, the GS1 Evo is a new favorite among many riders!
- Ergonomic performance comfort grip
- Reduces hand and wrist discomforts
- Made in Germany
$72.49
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality.
- Carbon bar compatible
- Uses: mountain biking, touring, commuting
- Clamp: fiberglass composite with rubber inserts
$11.99
- BMX-style grip with medium flange
- Slip-on design for tool-free installation
- Classic, collapsible rib construction for excellent grip
- Soft Kraton rubber construction for comfort and durability
- Matching end plugs included
- 130mm
$18.99
COMFORT CONTROL
Designed for Downhill and Enduro riding, the Giant’s swage series grips have several Giant-only designs from inner tube to grip surface. The exclusive integrated tube featuring a rear hollow design combines thicker rubber in the palm and a unique web pattern for the fingers to provide superior control and ergonomic comfort.
- Ergo hand-fit design features a thicker rubber compound in the palm and webbed design for comfort and enhanced damping
- Giant-proprietary rubber compound increases control in any condition
- Multi-grip surface combination improves friction for better control
- Weight: 115g
$18.99
- Large Raised Multi-Striped Areas Help Enhance Vibration Damping
- Multi-Stripe Pattern Provides Optimal Friction In All Directions
- Unique Polymer Compound Helps Improve Durability
$27.99
- Ergonomically Designed For Comfortable Weight Distribution
- Extra Large Platform Reduces Hand Numbness
- Triple-Density Material Provides Support And Reduces Vibration
- Gel Layer Enhances Vibration Damping
- Unique Polymer Compound Improves Durability In All Conditions
- Giant 1.0 Lightweight Aluminum Lock-On System
$32.99
- 100% silicone material
- High friction surface for better grip
- Improved shock absorption over standard rubber grips
$34.99
COMFORT CONTROL
Designed for Downhill and Enduro riding, the Giant’s swage series grips have several Giant-only designs from inner tube to grip surface. The exclusive integrated tube featuring a rear hollow design combines thicker rubber in the palm and a unique web pattern for the fingers to provide superior control and ergonomic comfort.
- Innovative Integrated Tube provides stronger centered support while riding
- Rear hollow structure combines with high-density rubber design better cushioning
- Ergo hand-fit design features a thicker rubber compound in the palm and webbed design for comfort and enhanced damping
- Giant-proprietary rubber compound increases control in any condition
- Multi-grip surface combination improves friction for better control
- Weight: 103g
$37.99
- Ergonomically Designed For Comfortable Weight Distribution
- Extra Large Platform Reduces Hand Numbness
- Triple-Density Material Provides Support And Reduces Vibration
- Gel Layer Enhances Vibration Damping
- Unique Polymer Compound Improves Durability In All Conditions
- Giant 1.0 Lightweight Aluminum Lock-On System
$39.99 - $42.99
- Large Raised Multi-Striped Areas Help Enhance Vibration Damping
- Multi-Stripe Pattern Provides Optimal Friction In All Directions
- Unique Polymer Compound Helps Improve Durability
- Giant 1.0 Lightweight Aluminum Secure Double Lock-On System
$39.99
FEEL THE CONTROL
Giant Tactal Pro Single Lock-on mountain biking grips offer a flexible soft feel with excellent grip in all conditions. Tested on the North Shore of North Vancouver these grips are designed for maximum trail & enduro action.
FEATURES:
- A raised cuff end for a better fit and increased security
- Its unique wave pattern that provides a soft feel with outstanding grip
- The half waffle design provide the rider with a flexible grip for more control
- An exclusive diamond pattern that translates to a durable grip in all conditions
SPECIFICATIONS:
- Type: Single Lock-On (3mm)
- Size:132mm x 35mm
- Fit: Universal
$57.99
- Ergonomically Designed For Comfortable Weight Distribution
- Extra Large Platform Reduces Hand Numbness
- Triple-Density Material Provides Support And Reduces Vibration
- Gel Layer Enhances Vibration Damping
- Unique Polymer Compound Improves Durability In All Conditions
- Giant 1.0 Lightweight Aluminum Single Lock-On System
- Integrated Ergonomic Bar End For Multiple Riding Positions
$18.99
Like shock absorbers for your hands, the Swage Non Lock-On Grips take the oomph out of the ups and downs of the trail. The perfect amount of squish will keep you comfy—because cramp-free hands should be your reward for taking on new challenges.
- Ergo hand-fit design features thicker rubber compound in the palm and webbed design for comfort and enhanced damping.
- Giant-proprietary rubber compound increases control in any condition.
- Multi-grip surfaces combination improves friction for better control.
- 132mm length
$34.99
- Innovative Integrated Tube provides stronger centered support while riding.
- Rear hollow structure combines with high-density rubber design better cushioning.
- Ergo hand-fit design features thicker rubber compound in the palm and webbed design for comfort and enhanced damping.
- Giant-proprietary rubber compound increases control in any condition.
- Multi-grip surfaces combination improves friction for better control.
- 132mm length
Page 1 of 2
Next page